Vehicle recall R/2008/118
Fiat Bravo recall: Rear cross member welding may crack
DVSA recall R/2008/118 names the Fiat Bravo. It was launched 8 September 2008. It covers vehicles built 1 June 2007 to 30 June 2007.
Recall data updated
What can go wrong
It has been identified that the possibility exists that a non conforming weld may be present on the vehicle's rear cross member with the fixing bracket for the wheel axle hub. This non conformity in time; could cause the weld to break and crack the rear cross member which could have an adverse effect on the vehicle's stability.
The fix
Recalled vehicles will have the subject cross member identification numbers and weld markings checked; to ascertain whether they conform. Should this not be the case the cross member will be replaced.
Models and build dates
| Model | Built | Vehicles |
|---|---|---|
| Fiat Bravo | 1 June 2007 to 30 June 2007 | 120 |
Other recalls for these models
- R/2008/071 Possibiity of fire in the engine compartment 29 May 2008, Fiat Bravo
- R/2007/173 Brakes may fail 7 December 2007, Fiat Punto, Fiat Multipla, Fiat Bravo and others
- R/2007/121 Anti-roll bar bush wear 17 September 2007, Fiat Bravo
- R/1998/020 Loss of braking efficiency 13 March 1998, Fiat Bravo
More on these models
Found one you might buy?
A recall is one part of the picture. See what the VetTheCar Buying Report tells you about a specific car.
Source
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recall records (RecallsFile.csv), recalls launched 1992 to 2026. Recall data updated 22 September 2026.
Recall wording is DVSA's, with capitals and punctuation tidied and American spellings such as tire, center and windshield given in British English. We list a recall when its make and model match a car or van family with at least 1,000 DVSA MOT tests from 2022 to 2025, and when the maker of the vehicle issued it.
Not affiliated with or endorsed by DVSA. Methodology · Data sources