Vehicle recall R/2013/142
Mitsubishi I recall: Engine could overheat and stall
DVSA recall R/2013/142 names the Mitsubishi I. It was launched 6 February 2014. It covers vehicles built 31 January 2006 to 14 November 2007.
Recall data updated
What can go wrong
On Petrol versions (HA1W) the air bubble separation function of the condenser tank for the engine cooling system may not function properly when the engine is running at high RPM. This could result in coolant overflowing from the condenser tank. If the coolant overflows repeatedly and use of the vehicle continues without sufficient coolant engine overheating could occur. In the most serious case the engine could stall/heat seize and cannot be restarted
The fix
Recall the vehicles that are likely to be affected to check and where necessary replace the condenser tank refill the coolant and bleed the system.
Models and build dates
| Model | Built | Vehicles |
|---|---|---|
| Mitsubishi I | 31 January 2006 to 14 November 2007 | 601 |
Other recalls for these models
- R/2015/005 Reverse gear may not function 11 February 2015, Mitsubishi I
- R/2008/056 Vehicle may not be in the intended gear 26 June 2008, Mitsubishi I
More on these models
Found one you might buy?
A recall is one part of the picture. See what the VetTheCar Buying Report tells you about a specific car.
Source
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recall records (RecallsFile.csv), recalls launched 1992 to 2026. Recall data updated 22 September 2026.
Recall wording is DVSA's, with capitals and punctuation tidied and American spellings such as tire, center and windshield given in British English. On this page we also replaced a word that reads as a rating or an endorsement with a plain one. We list a recall when its make and model match a car or van family with at least 1,000 DVSA MOT tests from 2022 to 2025, and when the maker of the vehicle issued it.
Not affiliated with or endorsed by DVSA. Methodology · Data sources