Vehicle recall R/2012/117
Hyundai ix20 recall: Corrosion may affect handbrake performance
DVSA recall R/2012/117 names the Hyundai ix20. It was launched 31 October 2012. It covers vehicles built 4 October 2010 to 3 April 2012.
Recall data updated
What can go wrong
As a result of water ingress and attendant corrosion in the rear calipers the parking brake may not hold the vehicle on a hill when normal force has been applied to the parking brake lever.
The fix
Recall vehicles likely to be affected to either clean the axle and housing or fit new seals. Where necessary the rear calipers will be replaced.
Models and build dates
| Model | Built | Vehicles |
|---|---|---|
| Hyundai ix20 | 4 October 2010 to 3 April 2012 | 5,843 |
More on these models
- Hyundai ix20 MOT fail rates by age
- Hyundai ix20 common problems
- Hyundai ix20 ULEZ and clean air zone check
- 2019 Hyundai ix20 MOT record
- 2018 Hyundai ix20 MOT record
- 2017 Hyundai ix20 MOT record
- Hyundai ix20 handbrake repair repair cost
- Hyundai ix20 track rod end replacement repair cost
- All Hyundai recalls
- All makes
Found one you might buy?
A recall is one part of the picture. See how often it fails its MOT at each age, or what the VetTheCar Buying Report tells you about a specific car.
Source
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recall records (RecallsFile.csv), recalls launched 1992 to 2026. Recall data updated 22 September 2026.
Recall wording is DVSA's, with capitals and punctuation tidied and American spellings such as tire, center and windshield given in British English. We list a recall when its make and model match a car or van family with at least 1,000 DVSA MOT tests from 2022 to 2025, and when the maker of the vehicle issued it.
Not affiliated with or endorsed by DVSA. Methodology · Data sources